Additives and functional resins for coatings and inks
New energy, semiconductor additives
XOANONS® Polyether modified silicon leveling agent
Model number
XOANONS®WE-D5433
Specification
Composition: Polyether modified polydimethyl siloxane
Appearance: slight yellowish to yellow clear liquid (paste at low temperature)
Solvent: ——
Density: 1.01-1.05g/ml(25±1)℃
Viscosity: R-Y(Bubble Viscometer Method)(25±0.2)℃
Active substance: 100%
Flash point: ＞100℃
Note: This data sheet is intended to give typical results, not standard.
Subject to COA.
Application system
Water-based, Solvent-based, UV Cure
Properties
?Excellent compatibility in varnish.
?Provide a stronger reduction of the surface tension.
?Reduce the friction coefficient. Increase slip and improve scratch resistance.
?Good recoating and minimal influence on adhesion of coating films at suitable addition and baking temperature.
?Excellent property of anti-crater.
?Good water-solubility.
?Hazy and viscous may occure at low temperatures. It would become clear and flow after heated. This will not influence the quality
Incorporation
Easy to add with pre-diluted solvent the same as that in the coating system. Can added as post-addition.
Suggest addition
Addition to total formulation 0.05-0.5%
Storage stability
Keep intact 24 months in original package.Products beyond the storage period may continue to be used after inspection. The container must be closed immediately after use.
Application recommendation
Transparency in varnish 5
Defoaming 0
Dynamic surface tension 5
Static surface tension 5
Slip 4
Prevent orange peel 1
0=unavailable 5=very effective
Package
25KG / 180KG
Go
Top