Additives and functional resins for coatings and inks
New energy, semiconductor additives
XOANONS® Polyether modified silicon leveling agent
Model number
XOANONS®WE-D5410
Specification
Composition: Polyether modified polydimethyl siloxane
Appearance: slight yellowish to yellow clear liquid(paste at low temperature)
Solvent: PMA
Density: 0.98-1.02g/ml(25±1)℃
Viscosity: ≥U(Bubble viscometer)(25±0.2)℃
Content: 92±3%(105℃ 3h)
Flash point: ＞70℃
Note: This data sheet is intended to give typical results, not standard.Subject to COA.
Application system
Water-based, Solvent-based, UV Cure
Properties
?Provide a stronger reduction of the surface tension.
?Reduce the friction coefficient. Increase slip and improve scratch resistance.
?Good recoating and minimal influence on adhesion of coating films.
?Excellent anti-cratering ability, commonly used to replace oil-resistant agent, do not affect the environment and recoatability.
?Hazy and viscous may occur at low temperatures. It would become clear and flow after heated. This will not influence the quality.
Incorporation
Diluted before addition, added in any stage including post-adding.
Suggest addition
Addition to total formulation 0.05-0.5%
Storage stability(solvent system)
Keep intact 24 months in original package.Products beyond the storage period may continue to be used after inspection. The container must be closed immediately after use.
Application recommendation
Transparency in varnish 1
Defoaming 2
Dynamic surface tension 5
Static surface tension 5
Slip 5
Prevent orange peel 1
0=unavailable 5=very effective
Package
25KG / 180KG
Go
Top